The site plan for your Phoenix hazardous materials application.
Phoenix businesses that use, store or handle hazardous materials file an application with the Fire Department. It has three parts, and the third is a site plan. We measure the building and draw it.
What the rule asks for
The Phoenix Fire Department’s hazardous materials application packet describes three required parts: the customer information page, the Hazardous Material Inventory Statement (HMIS) and the site plan. The packet asks for:
- An up-to-date inventory of all hazardous materials stored on the property
- A site plan indicating the locations where these materials are stored or used
- Phoenix describes the information as vital for firefighters responding to a hazardous materials incident
- Daisy Mountain Fire District in Anthem uses the same three-part packet. Chandler directs businesses to the state Tier II system, and Gilbert sets its own thresholds: see Gilbert hazardous materials reporting
What we draw
We scan the building with iGUIDE, so the floor plan is measured, not sketched. Then we place what the rule asks for on it.
- Measured floor plan and site outline
- Each storage and use location, keyed to the lines on your inventory statement
- Outdoor tanks, cylinders and yards
- Exits, shutoffs, the fire department connection and the nearest hydrant where you want them shown
- North arrow, address, scale and date
What we do, and what we don’t
We draw the site plan. We do not complete the inventory statement, classify materials by hazard class, or apply for the permit. Locations and material names on the drawing come from your inventory.
$500 per building plus $0.05 per square foot scanned: $750 for 5,000 ft², $1,000 for 10,000 ft², $1,750 for 25,000 ft². You receive the drawing and the measured floor plan as PDFs, plus a 3D walkthrough. Updating a drawing we made, when things move, is $150. Dimensioned CAD files are our as-built service on the regular schedule. No travel charge anywhere in Maricopa County or within 35 miles of Gilbert (except Wickenburg and Gila Bend, which carry a $250 distance fee).
Get a fixed price
Tell us the address and roughly how big the building is. No call needed.
Is the Phoenix site plan the same as a Tier II site map?
Close. Both show where hazardous materials are kept. If you file both, one scan and one drawing can usually serve the two, with the legend keyed to each inventory.
Does Phoenix need this every year?
Phoenix describes an annual assessment fee and asks for an up-to-date inventory with the application. Check with the Special Hazards Unit whether your site plan must be resubmitted when nothing has changed.
Where does the application go?
The Phoenix packet says to submit electronically to the Fire Prevention Section. The Special Hazards Unit reviews it and may follow up with an inspection.
Sources, checked 15 November 2026: Phoenix Fire Department Special Hazards Unit and Hazardous Materials Annual Assessment Packet (rev. 10/2024); Daisy Mountain Fire District hazardous materials permit packet (rev. May 2026); City of Chandler hazardous material inventory reporting instructions. RevealBuilt measures and draws. It is not a regulator, engineer or licensing consultant, and it does not decide what applies to you. Confirm the requirement with the agency or your consultant before you order.