Site maps and floor plans that regulators ask for.
A surprising number of Arizona permits, plans and license applications need a drawing of your building. Most get a sketch from memory. We scan the building once and draw each one on a measured floor plan.
$500 per building plus $0.05 per square foot scanned. $1,000 for 10,000 ft². A second drawing from the same scan is $150. High-piled storage and health licensing plans need CAD files, so they follow the regular schedule.
What we draw, and the rule behind each
| Drawing | Why you need it |
|---|---|
| Tier II site maps | ADEQ requires a site map with every Arizona Tier II chemical inventory report |
| High-Piled Storage Floor Plans | The fire code asks for a floor plan showing the location and dimensions of high-piled storage areas |
| SPCC Facility Diagrams | Every SPCC plan needs a facility diagram of oil containers, transfer areas and piping |
| Hazardous Waste Contingency Plan Maps | Large quantity generators must give responders a quick reference guide with a facility map |
| Stormwater (SWPPP) Site Maps | Arizona industrial stormwater permits require a pollution prevention plan with a site map |
| Phoenix Hazardous Materials Site Plans | Phoenix Fire requires a site plan with every hazardous materials application, showing where materials are stored or used |
| Liquor License Floor Plans | Arizona liquor license applications and patio extensions need a diagram of the licensed premises |
| ADHS Licensing Floor Plans | Arizona health care institution license applications need a floor plan of every story and a site plan |
| Emergency and evacuation floor plans | The floor plan under an emergency action plan (EAP) and the maps posted on your walls |
| Fire pre-plan building maps | The building map with key features and hazards that your fire department keeps |
Samples
Two of the drawings, shown on a made-up building. Each page above has its own.
What we do, and what we don’t
We measure and draw. We do not write plans, certify compliance, seal drawings or file applications, and we are not engineers, architects or licensing agents. Every page lists the rule it is based on, with a link, so you can check it yourself. Confirm what applies to you with the agency or your consultant before you order.
What do these drawings cost?
Most follow one rule: $500 per building plus $0.05 per square foot scanned, delivered as PDFs with a 3D walkthrough. That is $1,000 for a 10,000 square foot building, and a second drawing from the same scan is a $150 update. Two are priced on the regular as-built schedule because they need dimensioned CAD files: high-piled storage floor plans and health facility licensing floor plans.
Can one visit cover several filings?
Yes, and that is the point. A plant that files a Tier II report, keeps an SPCC plan and holds a hazardous materials permit needs three drawings of the same building. We scan once and draw each one from the same measured plan.
Do you prepare the plans or applications?
No. We measure and draw. Your environmental consultant, engineer, architect or licensing agent prepares and files. For Tier II reports, our sister company SECA does the reporting.